Connectivity test

If you want to test the connectivity between your IP and one of our servers,you can use our Looking Glass. How to test the connectivity:

1. Choose a location in the drop-down list.

2. Choose Internet protocol version 4 or 6 (IPv4 or IPv6).

3. Choose a command for testing.

1. ping – shows time which needs to transfer data packet from your IP address to the server.

2. traceroute – transfers data packet from the server to your IP address and shows information about all transitional routers which data packet passes through when it goes to the destination node. 

3. route for all – shows 2 best bgp-routes for each location.

4. route for bgpmap – shows information about which AS (autonomous systems) the data packet have to pass for achieve destination network. 

   
   4. Write your IPv4 or IPv6 address and start the test.

   Sometiomes it takes several minutes to show you the information for your request, depending on what location you chose.

    

   In the asnwer to your request you can see an information about providers, owners of the IP-addresses and about autonomous systems.